Product Description:

The MAF130C-0100-FQ-S2-BH0-05-A1 is a liquid-cooled asynchronous housing motor built by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. It is intended for direct integration into machinery that requires steady torque and compact mounting. As an asynchronous design, it works with a matched drive to maintain stable speed-regulated operation under changing load conditions. Designed for flange mounting, the motor bolts directly to machine frames, while the cooled housing carries heat away from surrounding equipment in production lines, test rigs, and extrusion drives.

The size 130 stator winding is arranged for a rated speed of 1000 rpm. Heat is removed by liquid cooling, and the cooling jacket uses a 1/4 inch connection thread so standard hydraulic fittings can be used. Power enters on the B-side through a shielded connector, which helps protect signal quality and supports orderly cable routing near moving assemblies. Speed and position data are transmitted through the EnDat2.1 digital interface, and the single-turn absolute encoder provides 2048 increments so the drive can track rotor position accurately during operation. An A-side fixed bearing supports rotor alignment during axial loading, and insulation class F allows higher internal temperatures without electrical breakdown.

Additional electrical compatibility comes from an encoder supply range of 7-12 V, which matches common drive electronics without a separate regulator. The housing has an IP65 rating to resist dust and water jets, and continuous operation is approved from 0 to 40 °C. A vibration grade A build in accordance with DIN EN 60034-14 helps limit transmitted oscillation to nearby machine elements during rotation. The rotor ends in a plain shaft without a sealing ring, so any fluid exclusion must be handled by the external coupling or surrounding machine design. No holding brake is fitted, so static load retention must come from the driven system.