Product Description:

The MAF130B-0250-FR-S2-HH0-05-H1 is a liquid-cooled asynchronous motor in the MAF IndraDyn Asynchronous Motors series. It converts inverter power into mechanical rotation for pumps, extruders, and other process axes that require steady torque with low heat buildup. The motor uses frame size 130 with B length, which keeps the housing compact for equipment with limited installation space. Its plain shaft couples directly to gearboxes or pulleys, and the asynchronous design suits process machinery that operates for long periods under stable load.

For consistent motion control, the motor runs at a rated speed of 2500 rpm, and the 0250 winding matches compatible drive parameter sets. Heat is removed through liquid cooling supplied by an enclosed rapid-action 1/4-inch coupling, which helps limit coolant loss during connection and service. A high-speed bearing set lowers friction at operating velocity and is built to DIN EN 60034-14 grade A. The encoder electronics provide a digital EnDat2.1 interface and accept 7–12 V, allowing the controller to read absolute position directly. The housing has an IP65 rating, which helps keep dust and water jets out even when the turnable terminal box is positioned on side B. The motor comes without a holding brake or shaft sealing ring, so applications that need static holding torque or oil retention must use external measures.

The feedback system provides 2048 increments per turn in single-turn mode, which helps the drive maintain accurate speed regulation and position tracking. The housing uses flange mounting, and the turnable power box helps simplify cable routing in enclosures with ambient temperatures from 0 to 40 °C. Insulation class F permits winding temperatures up to 155 °C during normal operation. With vibration level A, the motor is suited to continuous-duty operation in standard industrial environments. The plain shaft also reduces coupling complexity, and the lack of a shaft seal lowers drag in liquid-cooled applications.