Product Description:

The MAF130B-0200-FR-S0-BH0-05-N1 is an asynchronous housing motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. Built for drive axes that require continuous torque while keeping enclosure heat low, the model combines a stator jacket with a compact IEC-based frame. In automated machining cells or forming stations, it supplies constant rotary power to gearboxes or directly coupled loads, helping maintain throughput where air cooling is insufficient.

The motor employs liquid cooling, so its heat exchanger circuit removes losses at the stator before they reach surrounding equipment. Coolant enters through an enclosed rapid-action coupling sized at 1/4 inch, allowing quick disconnection without draining the entire loop. The winding set uses code 0200 and is designed for a rated speed of 2000 rpm, matching common inverter outputs in metal-cutting or test-stand applications. With a protection rating of IP65, the housing blocks dust ingress and high-pressure water jets, which is important when the unit is mounted close to cutting fluids. Class F insulation permits winding temperatures up to 155 °C, extending service life under cyclic overloads.

Operation is specified for ambient temperatures from 0 to 40 °C; within this range, the internal coolant keeps bearing grease below its limit even during prolonged duty. A rigid motor flange supports flange mounting, allowing the unit to be bolted directly to machined frames without alignment feet. Power cables exit on the B-side through a sealed connector, so terminal boxes are unnecessary in tight spaces. The active section follows frame size 130 and length code B, giving a balance between continuous torque and moment of inertia for mid-scale servo loops. Because the shaft is plain and supplied without a sealing ring or a holding brake, external coupling devices handle axial clamping and static load retention.