MAF130B-0200-FQ-S2-LF0-35-N1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911343418
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MAF130B-0200-FQ-S2-LF0-35-N1 is part of the MAF IndraDyn Asynchronous Motors series and features a liquid cooling system with a 1/4 inch connection thread. This motor comes with a single-turn absolute encoder using EnDat2.1 and offers a rated speed of 2000 min-1. It supports flange and foot mounting, meets IP65 protection class, and follows the DIN EN 60034-14 standard.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAF130B-0200-FQ-S2-LF0-35-N1 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat in the MAF IndraDyn Asynchronous Motors series. It is intended for industrial automation and supplies continuous rotary power to conveyors, spindles, and processing axes. Its liquid jacket removes heat from the stator so winding temperature remains stable during extended duty cycles. The motor supports flange or foot mounting, which helps it fit layouts that must meet DIN EN 60034-14 vibration limits. This arrangement suits installations that require stable thermal behavior and a sealed exterior during long operating periods.
Its nominal speed is 2000 rpm, which corresponds to the operating point used for rated torque. Heat is removed by liquid cooling, and a 1/4 inch connection thread allows direct attachment to a coolant manifold. Rotor position feedback is transmitted through the EnDat2.1 digital interface, giving the drive absolute position data during operation. The housing has an IP65 rating that helps block dust and low-pressure water. Standard bearings support the rotor, the power connector is on the left side, the motor uses a plain shaft, and a labyrinth seal helps limit fluid migration along the shaft.
The integrated single-turn absolute encoder provides 2048 increments of resolution and operates from a 7 to 12 V supply on the same feedback channel. Electrical insulation meets class F, and the permitted ambient range of 0–40 °C supports heavy-duty service when cooling flow is maintained. Dynamic balancing is rated to vibration level A, which helps reduce structure-borne noise during continuous rotation. The motor has frame size 130, frame length B, and winding code 0200, and because it does not include a holding brake, the load must be secured by an external device when power is removed.
Frequently Asked Questions about MAF130B-0200-FQ-S2-LF0-35-N1:
Q: What type of shaft and sealing does the MAF130B-0200-FQ-S2-LF0-35-N1 motor use?
A: This model features a plain shaft with a labyrinth seal to help prevent ingress of contaminants during operation.
Q: What cooling method and connection size are available on the MAF130B-0200-FQ-S2-LF0-35-N1 motor?
A: The MAF130B-0200-FQ-S2-LF0-35-N1 motor is equipped with liquid cooling and a 1/4 inch cooling connection thread.
Q: What encoder type and interface does the MAF130B-0200-FQ-S2-LF0-35-N1 offer?
A: This motor is equipped with a single-turn absolute encoder using the EnDat2.1 interface and 2048 increments of resolution.
Q: What is the operating temperature range for the MAF130B-0200-FQ-S2-LF0-35-N1 motor?
A: The permissible ambient temperature for this motor is 0 to 40 °C, supporting standard operational environments.
Q: What level of protection does the MAF130B-0200-FQ-S2-LF0-35-N1 motor provide?
A: The MAF130B-0200-FQ-S2-LF0-35-N1 carries an IP65 protection class, providing dust tightness and protection against low-pressure water jets.
