Product Description:

The MAF130B-0200-FQ-S2-AG0-05-R1 is an asynchronous drive manufactured by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. Classified as a liquid-cooled asynchronous housing motor, it serves industrial automation tasks where continuous torque is required and ambient airflow is limited. Connected to an inverter, the unit converts three-phase electrical power into controllable mechanical motion for conveyors, extruders, or high-precision machine axes.

Heat is extracted through liquid cooling, and the stator jacket connects to plant piping through a 1/4 inch thread. This cooling arrangement helps keep winding temperatures stable while maintaining the enclosure’s IP65 rating. At its rated speed of 2000 rpm, the motor transfers power through a plain shaft with a shaft sealing ring. The housing uses flange mounting, so no foot hardware is required. Electrical supply enters on the A-side through a molded connector, and the motor is supplied without a holding brake, so static position must be secured externally. Compliance with DIN EN 60034-14 and vibration level A limits unbalanced forces, while frame length B and the size-130 stator help the motor fit compact machine layouts. Winding code 0200 identifies the copper cross-section and resistance characteristics used with this thermal design.

Position feedback is handled by a single-turn absolute encoder with the EnDat2.1 interface, delivering 2048 increments of resolution to the drive and operating from a 7 to 12 V encoder supply. The insulation system is class F, allowing elevated internal temperatures without insulation breakdown. Continuous duty is supported in ambient temperatures from 0 to 40 °C. A plain shaft profile simplifies coupling, and the flange pattern used on the 130 frame supports straightforward mounting to matching machine surfaces. Frame length B and the side-mounted power connector help reduce total machine depth, while vibration level A limits transmitted oscillation to adjacent structures.