Product Description:

The MAF130B-0200-FQ-S2-AG0-05-A1 is a liquid-cooled asynchronous housing motor manufactured by Bosch Rexroth Indramat in the MAF IndraDyn Asynchronous Motors series. Designed for flange integration into automated machinery, the unit delivers continuous rotary power to conveyors, spindles, and indexing tables while routing its power connector on the A-side for compact cabinet layouts. Within industrial automation cells, it serves as the main drive source where heat density and enclosure limits make this motor format practical. Its design suits equipment that requires steady output, enclosed installation, and reliable operation over long production cycles.

Thermal control is achieved through liquid cooling that enters the stator jacket via a connection thread sized at 1/4 inch, allowing direct attachment of standard coolant lines. Under nominal excitation, the rotor reaches a rated speed of 2000 rpm, which provides a stable operating point for matched gearing and process motion. Position feedback is provided by a single-turn absolute encoder that communicates through EnDat2.1 and offers 2048 discrete increments for accurate speed and position loops. The cast housing is sealed to IP65, protecting windings and bearings from dust and low-pressure water spray encountered on production lines, and the flange mounting face keeps the motor aligned with the driven load.

A fixed bearing on the A-side locates the rotor axially, and the winding system carries an insulation rating of Class F so conductor temperatures can rise without harming dielectric strength. The motor operates in ambient conditions from 0 to 40 °C, which suits typical indoor production areas with controlled air conditions. It is supplied without a holding brake, so shaft locking during power-off requires an external device or system-level braking method. A plain shaft with a sealing ring supports connection to gearboxes or belt drives, and vibration level A supports installation on precision machine frames.