Product Description:

The MAF130B-0200-FQ-N0-AG0-05-A1 is an asynchronous housing motor manufactured by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. As a liquid-cooled unit prepared for flange mounting, it delivers controlled rotary motion to conveyor sections, spindle drives, and other automation axes where continuous heat removal is needed. Within an integrated drive line, the motor converts inverter current into mechanical torque while the housing supports closed-loop coolant circulation during high-duty cycles.

The stator jacket is designed for liquid cooling. Twin ports with a connection thread accept standard fittings, and the sealing geometry corresponds to a 1/4 inch pipe size for straightforward manifold integration. With an enclosure rating of IP65, the motor resists dust ingress and water jets, allowing installation on open machine frames. Its nominal running point is a rated speed of 2000 rpm, giving the attached inverter a predictable load range. Power arrives on the A-side through a keyed industrial connector, separating high-voltage conductors from feedback wiring, while frame size 130, length code B, and a fixed bearing on side A support stable mechanical installation.

A plain shaft exits the housing and is protected by a shaft sealing ring that helps prevent external fluids from entering the bearing cavity. The motor is supplied without a holding brake, so any static load must be secured by the drive or by external hardware. Thermal endurance is based on insulation class F, and dynamic balance meets vibration level A to help limit structural resonance during operation. Acceptable ambient temperatures span 0 to 40 °C, and winding code 0200 matches the intended electrical data. Mechanical vibration testing follows DIN EN 60034-14, and the encoder is not installed so feedback can be selected separately.