Product Description:

The MAF130B-0200-FQ-M7-LF0-05-A1 asynchronous motor is built by Bosch Rexroth Indramat and belongs to the MAF IndraDyn Asynchronous Motors series. Classified as a liquid-cooled asynchronous housing motor, it supplies continuous rotary power to automated presses, conveyors, and forming stations where process loads can create sustained heat at the motor surface. Compliance with DIN EN 60034-14 keeps vibration in class A, so the unit can be integrated directly into machinery frames without extra isolation hardware and still support smooth coupled operation.

The stator winding identified by code 0200 is tuned for a rated speed of 2000 rpm, which allows the drive inverter to operate at standard output frequencies without field weakening. Heat removal relies on liquid cooling, and a dedicated 1/4 inch connection thread on the jacket simplifies hose installation while matching common chiller fittings. The same connection thread style serves the return line, which helps keep coolant routing consistent on both sides of the circuit. A housing tightness rating of IP65 blocks dust and water jets, while insulation class F permits winding temperatures up to 155 °C during cyclic overloads.

Mechanical attachment uses flange mounting, and the power leads exit on the left through a sealed connector to keep cable routing compact around the machine. The shaft chamber is guarded with a labyrinth seal, which helps prevent coolant spray from entering the bearing zone, and operation is specified from 0 to 40 °C for typical industrial environments. Because the motor is supplied without a holding brake, static load retention must be provided by the drive or by external clamps during power loss. An A-sided fixed bearing holds the rotor axially, and frame size 130 with length code B keeps the housing compact while maintaining rigid support for the shaft.