Product Description:

The MAF130B-0200-FQ-M2-LF0-05-A1/S039 is an asynchronous housing motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. Designed for liquid-cooled operation, it serves as a drive element in automated machining centers, press lines, and material-handling axes where continuous torque and tight temperature control are required. The unit converts electrical power into controlled rotational motion for precise positioning and speed regulation in industrial automation cells.

Its thermal management relies on liquid cooling, and coolant is supplied through a connection thread that matches a 1/4 inch port, simplifying closed-loop circuit plumbing. The motor houses an EnDat multi-turn absolute encoder that operates on a supply range of 7–12 V. The EnDat2.1 interface allows bidirectional digital position feedback with automatic parameter download to the drive. A resolution of 2048 increments per revolution supports fine speed regulation and repeatable positioning. Power enters from a left-side connector, and flange mounting permits direct attachment to machine frames while the A-side fixed bearing maintains axial accuracy.

Electrical insulation meets class F limits, and winding code 0200 is rated for a nominal speed of 2000 rpm. The plain shaft is protected by a labyrinth seal, and the housing carries an IP65 ingress rating against dust and water jets. Compliance with DIN EN 60034-14 governs vibration behavior, and the unit is assigned vibration level A for general-purpose precision. The motor has frame size 130 and length B, and a flange centered on the shaft simplifies alignment. Ambient operation is allowed from 0 to 40 °C, and because there is no holding brake, static torque must be provided externally. The left-hand power connector and EnDat cable exits keep wiring separated from coolant hoses, and the plain shaft can be coupled through a keyed hub or clamp sleeve according to machine design.