Product Description:

The MAF130B-0200-FQ-M2-AH0-05-N1 is an asynchronous motor manufactured by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. Classified as a liquid-cooled asynchronous housing motor, it supplies regulated rotary power in automated cells where heat is removed by circulating coolant rather than forced air. Coupled with a drive controller, it converts electrical energy into controllable torque for presses, transfer lines, and other continuous-duty machinery. This operating principle suits installations that need steady output, closed-loop control, and heat removal that does not depend on surrounding airflow.

Its housing meets the IP65 protection class, preventing dust and water jets from reaching the internal windings during normal industrial use. A closed liquid-cooling circuit connects through a 1/4-inch thread and allows the motor to sustain a rated speed of 2000 rpm without thermal derating. The motor mounts by flange on the 130 mm frame, power is routed through an A-side connector, and standard bearings support general radial loads. Position feedback comes from a multi-turn absolute encoder with an EnDat2.1 interface that operates on 7–12 V, allowing reliable communication over long motor cables. The feedback system gives the connected drive stable digital position data during operation.

Feedback resolution reaches 2048 increments, matching the 0200 winding code used for this motor variant and supporting accurate speed and position control. Thermal endurance is supported by Class F insulation, and the motor uses a plain shaft without a shaft sealing ring. Operation remains within Vibration level A in accordance with DIN EN 60034-14. Frame length B, the standard bearing arrangement, and an ambient range of 0–40 °C set the installation limits, while the lack of a holding brake means an external device must secure static loads when the axis is stopped.