Product Description:

The MAF130B-0200-FQ-M0-AH0-05-R1 liquid-cooled asynchronous housing motor belongs to the MAF IndraDyn Asynchronous Motors series manufactured by Bosch Rexroth Indramat. As a three-phase induction unit built for flange mounting inside machines, it supplies rotational power to conveyors, extruders, and other motion axes that require continuous torque without external fan noise. Liquid circulation through the stator jacket carries heat away, allowing the motor to deliver rated output while keeping the frame compact for densely packed automation cells. The enclosed housing also supports installation in machine layouts where available space is limited and stable thermal behavior is needed during long production runs.

Heat management is based on liquid cooling, and the built-in cooling jacket links to plant chillers through a 1/4 inch connection thread at the stator flange. This closed circuit helps the motor maintain its rated speed of 2000 rpm during continuous duty and reduces the need for separate airflow paths around the housing. The enclosure has an IP65 rating, which helps keep out dust and water jets during routine washdown. Frame size 130 with a length-B body, flange mounting, and an A-side power connector support rigid installation on gearboxes or direct-drive shafts while preserving space around adjacent equipment.

For service life, the windings use class F insulation and operate with vibration level A under DIN EN 60034-14, which helps limit mechanical stress during high-speed cycles. Operation is permitted in ambient temperatures of 0 to 40 °C, so the surrounding machine area and coolant circuit must keep the stator within its thermal range. Torque is transmitted through a plain shaft without a shaft sealing ring, which suits coupling sleeves that are lubricated separately. Electrical power is supplied through a keyed industrial connector, and the motor comes without a holding brake, so stationary loads must be secured by the drive or external mechanical locking.