Product Description:

The Bosch Rexroth Indramat MAF130B-0150-FQ-S2-RQ0-05-V1 belongs to the MAF IndraDyn Asynchronous Motors series and serves as a housing motor for speed-controlled industrial drives. It mounts on a flange and uses a right-side power connector for straightforward cabinet wiring. This arrangement supports fixed installation where the motor housing is integrated directly into the machine structure. The motor has frame size 130 and frame length B, and the shaft carries a keyway balanced with the complete key. It has no shaft sealing ring or holding brake, so external devices must manage leakage and static load retention. Class F insulation, vibration level A, and an ambient range of 0 to 40 °C support normal installation conditions.

Process heat is removed by liquid cooling through a built-in channel that ends in a connection thread. The port is cut to 1/4 inch, allowing direct coupling to common fittings. With this cooling path active, the motor operates at 1500 min⁻¹ while the enclosure remains sealed to IP65, which keeps dust and low-pressure water jets away from the windings. Position data come from a single-turn absolute encoder that communicates over EnDat2.1, enabling direct feedback to the drive controller without extra converters. The closed circuit removes airflow constraints, so the motor can be installed inside sealed frames. Liquid cooling also avoids the need for external airflow around the motor body.

For precise torque control, the encoder measures 2048 increments per mechanical revolution and is powered from 7–12 V, which removes the need for an auxiliary regulator inside the cabinet. The rotor and stator are supported by reinforced bearings that tolerate higher radial forces during demanding duty cycles. This bearing arrangement is useful where couplings or driven elements add side load to the shaft. Compliance with DIN EN 60034-14 and winding code 0150 keep vibration behavior and fit consistent with the rest of the series.