MAF130B-0150-FQ-S2-LF0-35-N1
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911337883
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
MAF130B-0150-FQ-S2-LF0-35-N1 Induction Motor is manufactured by Bosch Rexroth Indramat. This motor has a Singleturn absolute encoder , EnDat2.1, with 2048 encoder and a Standard bearing. It also has a Smooth Shaft With Labyrinth Seal shaft and is not equipped with a holding brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MAF130B-0150-FQ-S2-LF0-35-N1 is a product from the Bosch Rexroth Indramat company. It is a housed induction motor with a squirrel-cage rotor design. It belongs to the MAF series of motors that are cooled via liquid cooling. The motor features a singleturn absolute encoder with the EnDat2.1 interface. It has a power connector that goes to the left of the unit. It doesn?t feature a blocking brake but supports the flange and foot mounting styles for installation. It uses standard deep-groove ball bearings and a has a standard vibration severity grade.
The MAF130B-0150-FQ-S2-LF0-35-N1 has a rated torque of 115 Nm, a rated power output of 18.1 kilowatts, and a rated current of 43.7 Amperes. The rated speed of the unit is 1500 rpm, while the key speed of the unit is 1000 rpm. The unit can output a maximum torque of 264 Nm, and a maximum power output of 37.1 kilowatts. It can reach a maximum speed of 7500 rpm and a maximum current of 94.7 A. The continuous torque at standstill and continuous current at standstill ratings for the product are 120 Nm and 45.3 A, respectively.
The MAF130B-0150-FQ-S2-LF0-35-N1 asynchronous motor has a power wire cross-section of 10 mm2 and a moment of inertia of 7.9 x 10-2 kgm2. The unit weighs 81 kilograms and it features a total of 3 pole pairs. The discharge capacity of the motor is 16 nF and it has a duty cycle time of 10 minutes. When water is used as a cooling agent, the required coolant flow with a power loss dissipation of 2 kilowatts is 2.9 liters per minute. The maximum system pressure for the liquid cooling system is 3 bar.
