Product Description:

The MAF130B-0150-FQ-S2-HH0-35-H3 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. It serves as a main drive element in automated machinery where heat is removed through the frame to support continuous torque output during sustained operation. Its housing can be installed by flange or foot mounting, which lets the motor fit machines that use either face attachment or base support without changing the basic drive function. This asynchronous design is suited to equipment that needs dependable main-drive performance in production systems with limited space around the motor body.

Heat is extracted by a closed circuit that uses liquid cooling fed through a 1/4-inch connection thread, allowing the unit to maintain its rated speed of 1500 rpm at full load. For feedback, a single-turn absolute encoder communicates over the EnDat2.1 interface and resolves shaft position to 2048 increments, so the connected drive receives precise rotor position data during motion control. The motor has an enclosure rating of IP65, and the insulation system is class F. Mechanical power is transferred through a plain shaft without a sealing ring, which suits installations where no shaft seal is required at the motor output. Electrical power is routed through a rotatable terminal box on the B-side of the frame, which helps adapt cable direction to the machine layout. The motor uses winding code 0150.

The bearing arrangement is qualified for high-speed operation and is balanced to vibration level B per DIN EN 60034-14. During service, the motor withstands ambient temperatures from 0 to 40 °C without derating, and its frame length corresponds to code B within the 130 mm housing family. The feedback electronics draw 7 to 12 V, and that supply range supports the encoder electronics independently of the motor power circuit. Because the motor does not include a holding brake, any stationary load must be held by the driven mechanism or by controlled motor torque when the axis is at rest.