Product Description:

The MAF130B-0150-FQ-S2-AG0-35-V1 is an asynchronous housing motor produced by Bosch Rexroth Indramat and assigned to the MAF IndraDyn Asynchronous Motors series. It is built for automated machinery that requires continuous torque and flexible installation, because the housing combines flange and foot mounting so the motor can be attached to a frame plate or directly to a machine bed. In closed-loop drive systems, the motor works with a companion inverter for regulated current control, and it is supplied without a holding brake for applications that rely on the drive or external mechanics to hold the load.

Thermal management relies on liquid cooling, delivered through a jacket with inlet and outlet ports that use a 1/4 inch thread for connection to plant coolant circuits. Rotor position feedback is provided by a single-turn absolute encoder with an EnDat2.1 interface that resolves motion into 2048 increments, and the sensing electronics operate from a stabilized 7-12 V supply. The screw-locking power connector is mounted on the A-side to keep cable routing clear of the fan end. An enclosure rating of IP65 protects the stator against dust ingress and water jets, while a shaft sealing ring helps shield the plain journal from coolant or oil splash. Reinforced bearings support external belt or pinion loads, and the assembly follows DIN EN 60034-14 for mechanical balance.

The winding system uses insulation class F, allowing conductor temperatures suited to high load cycles within the specified ambient range of 0 to 40 °C. The output uses a plain shaft, which simplifies coupling alignment for applications that use external locking hubs or shrink disks. Under rated excitation, the motor runs at 1500 rpm, which matches common gearbox ratios and helps maintain vibration at level A. Frame size 130 and length B give the housing a compact footprint while still providing room for coolant passages and the 0150 winding code.