Product Description:

The MAF130B-0150-FQ-M2-RH0-05-A1 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. Designed for flange installation on machinery, the unit converts inverter output into controlled rotary motion in applications where heat must be removed through circulating coolant rather than ambient air. Its plain output shaft works with external couplings, and the integrated multi-turn feedback supports accurate speed regulation and repeatable position tracking in enclosed automation systems.

This model reaches a rated speed of 1500 rpm under nominal operating conditions. To keep stator temperature within safe limits, it uses liquid cooling through a 1/4-inch connection thread, and the fixed bearing on the A-side helps maintain axial alignment while coolant passes through the housing. The enclosure is rated IP65, which keeps out dust and resists low-pressure water jets in industrial service. Motion feedback is provided by a 2048-increment multi-turn encoder that communicates over EnDat2.1 and operates from a 7 to 12 V supply. Power conductors exit through a right-side connector, and the motor is supplied without a holding brake, which helps keep the overall length shorter.

The winding insulation uses class F, allowing the motor to tolerate winding temperatures up to 155 °C during intermittent peaks. Its mechanical layout follows frame size 130 with length code B, and winding code 0150 matches the electrical characteristics expected by compatible IndraDrive inverters. The permissible ambient temperature range is 0–40 °C, so the surrounding machine space must stay within that band during operation. The motor also uses a plain shaft without a sealing ring, and it conforms to DIN EN 60034-14 for vibration behavior appropriate to standard industrial installations.