Product Description:

The MAF130B-0150-FQ-M2-LF0-35-N1 belongs to the MAF IndraDyn Asynchronous Motors series developed by Bosch Rexroth Indramat. It is a liquid-cooled asynchronous housing motor that aligns with DIN EN 60034-14 and is offered in frame size 130 with length B. With both flange and foot mounting, the unit can be installed on baseplates or machine walls, and its plain shaft allows direct coupling to driven equipment. In automated lines, this motor converts electrical energy into constant-speed mechanical rotation for conveyors, extruders, and process pumps.

The rotor is designed for a nominal speed of 1500 rpm, which matches common 4-pole, 50 Hz inverter outputs in industrial plants. Heat produced by the stator is removed through liquid cooling, and coolant is routed through a 1/4-inch connection thread to support higher continuous load than comparable air-cooled units. Position feedback is supplied by a multi-turn absolute encoder with 2048 increments per revolution, providing resolution suitable for speed regulation and closed-loop torque control. The motor housing carries an IP65 rating, so dust is kept out and low-pressure water jets do not interfere with operation. Electrical power reaches the stator through a left-hand connector, which simplifies wiring when the drive cabinet is placed on that side of the machine.

The winding insulation is rated for class F, permitting a maximum winding temperature of 155 °C before thermal limits are reached. A labyrinth on the output end provides noncontact shaft sealing, which blocks fluid splash while minimizing friction. Encoder data are transmitted through the EnDat 2.1 digital interface, which supports automatic parameter readout by the drive. The motor can operate in ambient air from 0 to 40 °C without derating, and its vibration level is limited to class A to help keep dynamic forces low on surrounding structures. It is supplied without a holding brake, making it suitable for installations that stop by drive torque or external clamps.