Product Description:

The MAF130B-0150-FQ-M2-BH0-05-A1 is a liquid-cooled asynchronous housing motor manufactured by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. Designed for industrial automation, it drives pumps, extruders, and test stands that demand steady torque and close thermal control. The 130 mm frame size and B length code fit directly to flange plates that follow DIN EN 60034-14, allowing compact installation without external heat sinks and helping the motor fit into tightly arranged machine layouts.

Heat removal is handled by liquid cooling through a threaded connection, and the port uses a 1/4 inch fitting so standard plant hoses can be attached without adapters. An A-side fixed bearing helps keep axial movement low when belt or gear loads act on the shaft. The rotor is tuned for a rated speed of 1500 rpm, supporting steady operation in general-purpose conveyor and process-duty applications. Position data come from a multi-turn absolute encoder that resolves each revolution into 2048 increments and transmits those counts over the EnDat2.1 interface, enabling closed-loop control with accurate position tracking. A housing rated IP65 helps block dust and directed water so the motor can be mounted directly on the machine base without requiring a separate enclosure.

The encoder electronics are supplied with 7-12 V from the drive, matching the input range used by the feedback system. The windings use Insulation class F, which supports reliable operation when ambient temperature approaches the 0 to 40 °C operating range. The motor has a plain shaft and no shaft sealing ring, so external sealing is needed if splash exposure is expected. It is delivered without a holding brake, which reduces added inertia on rapid-start axes. Vibration level A supports smooth running on compliant frames, and winding code 0150 identifies the electrical layout used by the motor. Power enters on the B-side through a molded connector.