Product Description:

The MAF130B-0150-FQ-M0-LH0-05-R1 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat in the MAF IndraDyn Asynchronous Motors series. Built for continuous duty, the unit supplies controllable torque to conveyors, extruders, and test-stand spindles when driven by a suitable inverter. It uses a frame size 130 stator body with length code B, which fits standardized machine envelopes while providing the thermal headroom created by integrated coolant passages. Its operating profile suits process equipment that runs for long cycles and needs stable torque instead of frequent stop-start motion. The motor also conforms to DIN EN 60034-14 for vibration behavior in rotating electrical machines.

Heat is removed by liquid cooling through a 1/4 inch connection thread, which simplifies integration with closed-loop chillers and helps keep stator temperature stable under rated load. Electrical power enters from the left side through a rotatable connector that matches winding code 0150, which helps route cables in confined installations. At a rated speed of 1500 rpm, the motor produces constant torque for steady-process applications. Its insulation system is class F, and the enclosure is rated IP65 to resist dust and low-pressure water jets in damp or wash-down areas.

The motor uses flange mounting, which supports direct installation on matched machine faces such as gearboxes or pump housings. Torque is transferred through a plain shaft, and because there is no shaft sealing ring, external sealing or positive internal pressure may be needed where fluids are present. The design does not include a holding brake, so static load retention must be handled by the drive or an external locking device. Within a permissible ambient range of 0 to 40 °C, the rotor meets vibration severity grade A, which helps limit transmitted vibration to connected machinery.