Product Description:

The MAF130B-0150-FQ-M0-LH0-05-N1/S032 is an asynchronous motor built by Bosch Rexroth Indramat and supplied in the MAF IndraDyn Asynchronous Motors series. This liquid-cooled housing motor is intended to drive machinery that requires constant torque at moderate speed in automated production cells. It integrates into flange-mounted assemblies and supplies rotary motion for pumps, conveyors, or tool spindles under closed-loop inverter control. Because it is designed for inverter operation, it can be used in speed-regulated systems that need smooth response under changing load conditions.

Protection is provided by an IP65 enclosure, so the stator housing resists dust ingress and water jets when the motor is installed outside a cabinet. The motor has a speed limit of 1500 rpm, which gives the drive a suitable operating range for steady industrial duty. Heat is removed through liquid cooling; coolant reaches the frame through a threaded port sized at 1/4 inch, which helps with hose connection and compact routing. The motor uses flange mounting, allowing the 130 mm frame to bolt directly to gearboxes or machine plates without foot adapters. Its windings use F-class insulation, which supports elevated internal temperatures while maintaining insulation performance.

Rotary output is delivered through a plain shaft, and the design omits a shaft sealing ring, so external sealing must be arranged when the motor is coupled to equipment exposed to fluids. The unit operates reliably in ambient temperatures from 0 to 40 °C, and operation outside this range may require derating or additional cooling capacity. Dynamic behavior is classified as vibration level A in accordance with DIN EN 60034-14, which supports stable running in general industrial installations. This arrangement suits enclosed machine sections where a separate shaft seal is provided by the coupled assembly. The bearing arrangement is standard, the power connector is positioned on the left side of the housing, and the motor is supplied without a holding brake to keep the assembly compact. Frame code B and winding code 0150 indicate the active stack length used for this 130 mm motor platform.