Product Description:

The MAF130B-0150-FQ-M0-AG0-05-H3 is a liquid-cooled asynchronous housing motor built by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. As a liquid-cooled drive, it delivers constant torque for conveyors, extruders, and test rigs that must run at a fixed speed under varying thermal loads. The unit integrates into automation cells through a power connector positioned on the A-side, and it follows insulation class F requirements to withstand elevated winding temperatures during continuous duty.

Its rated shaft velocity is 1500 rpm, providing an operating point that matches standard 50 Hz inverter outputs without mechanical gearing. Heat is extracted through liquid cooling, and the stator jacket includes a connection thread that mates directly with plant chillers. A high-speed bearing set reduces friction losses at nominal speed, improving service life during continuous duty. The housing is sealed to IP65, so airborne dust and low-pressure water jets do not reach the internal windings, and winding code 0150 matches the electrical characteristics used with compatible series drive inverters. Frame size 130 and frame length B establish the overall envelope, while vibration grade B limits dynamic imbalance during operation.

Ambient operation is limited to 0–40 °C, so the motor can be mounted close to machinery without supplemental cabinet conditioning. The coolant ports use a 1/4 inch thread, and the motor uses flange mounting in accordance with ISO face-mount patterns. A sealed plain shaft works with an integrated shaft sealing ring to keep lubricant inside the drive train. The design adheres to DIN EN 60034-14, which supports vibration compatibility with other rotating equipment. The motor does not include a holding brake, which lowers inertia for dynamic speed profiles.