Product Description:

The MAF130B-0150-FG-M0-LH0-05-NR is an asynchronous induction motor manufactured by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. As a liquid-cooled housing motor, it is intended to drive pumps, extruders, or material-handling equipment where stable torque and controlled heating are required. This motor type is well suited to continuous-duty applications where consistent thermal behavior supports process stability. Integration into closed-loop inverter systems makes the unit suitable for precise speed regulation inside automated production cells. Its flange interface allows direct coupling to standard machinery frames.

It operates at a rated speed of 1500 rpm, so the drive inverter can maintain output suited to standard four-pole machinery. The flange mounting pattern centers the stator housing without additional foot hardware, which helps alignment on compact machine frames. A housing protection level of IP65 resists dust ingress and low-pressure water jets, permitting installation near washdown zones. Thermal limits are observed within an ambient range of 0 to 40 °C when coolant flow is adequate. Power is supplied through a rotatable industrial connector, which helps route the cable in confined installations.

The rotor is supported by standard bearings, and the frame length code B balances torque density against overall weight. Drive torque is transmitted through a plain shaft, and the housing is supplied without a shaft sealing ring. This shaft arrangement suits applications that use an external sealing point at the driven machine. The motor is supplied without a holding brake, so static load retention must come from the drive. Class F insulation tolerates higher winding temperatures during liquid cooling. The motor uses frame size 130, while the electromagnetic layout follows winding code 0150. The power lead exits on the left to suit side-mounted cable ducts.