Product Description:

The MAF130B-0100-FQ-S2-BH0-05-A1 is an asynchronous motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. Its liquid-cooled housing is intended for continuous-duty positioning and speed-controlled tasks in industrial automation where compact thermal management is required. The motor connects to a central coolant circuit to keep winding temperatures stable during prolonged low-speed or high-torque operation. It bolts directly to the machine through a flange face and delivers rotary power without external ventilation. This arrangement supports enclosed installations where steady thermal behavior is important during extended run time.

The housing is arranged for direct machine mounting and connection to an external coolant loop. The stator jacket uses liquid cooling, and the coolant interface is a 1/4 inch thread so standard fittings can be used. An A-sided fixed bearing carries radial load, and the rotor uses a plain shaft without a shaft sealing ring. The housing has an IP65 rating, uses frame size 130 with length code B, and mounts by flange in line with DIN EN 60034-14. Power reaches the windings through a connector on the B-side, the 0100 winding code identifies the coil arrangement, and the motor is supplied without a holding brake. The allowable ambient temperature is 0 °C to 40 °C.

Feedback is provided by a single-turn absolute encoder that communicates through EnDat2.1. It provides 2048 increments of resolution and operates from 7–12 V, which allows direct connection to compatible drive controllers. The insulation system is rated to Class F, and dynamic balance meets vibration level A for smooth rotation during continuous operation. The motor reaches a nominal mechanical speed of 1000 rpm, which suits applications that require high torque at low operating speed. These electrical and feedback features support stable control during positioning and speed-regulated motion.