Product Description:

The MAF130B-0100-FQ-S2-AH0-05-A1 is an asynchronous motor manufactured by Bosch Rexroth Indramat as part of the MAF IndraDyn Asynchronous Motors series. Intended for industrial automation, it delivers controlled rotary motion while its liquid-cooled housing maintains thermal stability inside compact machine frames. The unit integrates with vector-controlled drives to power conveyor axes, forming stations, and similar installations that demand constant torque and accurate speed regulation. Closed-loop operation allows the motor to respond smoothly to changing load conditions without sacrificing stable rotation. This helps maintain repeatable motion in continuous-duty equipment.

Thermal management is provided by liquid cooling that circulates through a 1/4-inch connection thread on the stator jacket, so process water removes losses directly at the winding. A connector on the A-side carries the three-phase feed, matching the machine layout, while flange mounting centers the motor against the gearbox. The winding code 0100 is matched to a rated speed of 1000 rpm, and Class F insulation with vibration level A keeps electrical and mechanical stress within normal operating limits between 0 °C and 40 °C. An EnDat2.1 interface supplies high-resolution rotor feedback from a single-turn absolute encoder with 2048 increments and a supply range of 7–12 V. The housing has an IP65 rating, and the motor is supplied without a holding brake or shaft-sealing ring.

An A-side fixed bearing supports axial loads from belt tension while minimizing radial displacement at the drive end. The rotor uses a plain shaft, so torque is transferred through external hubs without keyways and coupling selection remains straightforward. The stator stack uses frame length B, which adds copper volume without changing the motor diameter. Compliance with DIN EN 60034-14 sets the balancing tolerances used during operation. The layout supports direct coupling to external transmission elements inside enclosed equipment.