Product Description:

The MAF130B-0100-FQ-N0-AL0-05-N1 is an asynchronous housing motor produced by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. It is intended for speed-controlled or positioning axes that need continuous torque output while staying thermally stable inside cramped automation frames. By circulating coolant through an integral jacket, the motor removes heat directly at the stator and can be paired with frequency inverters to drive conveyors, extruders, or dynamometers in industrial cells where precise regulation of an induction shaft is required. This arrangement supports stable operation in enclosed machine sections with limited airflow.

Protection is rated at IP65, preventing dust ingress and guarding against low-pressure water jets so the unit can be mounted outside sealed cabinets. Heat is removed by liquid cooling, and coolant passes through a 1/4-inch connection thread beside the active laminations, allowing the machine to maintain its rated speed of 1000 rpm without derating. A rigid mechanical interface is provided by flange mounting, and power terminals exit on the A-side through a quick-disconnect connector that simplifies wiring. Frame size 130 with length code B sets the mechanical envelope, standard bearings accommodate common radial loads, and winding code 0100 is used without an integrated encoder or internal brake.

The windings use Class F insulation, allowing maximum winding temperatures up to 155 °C and supporting ambient conditions from 0 to 40 °C. Dynamic behavior meets vibration grade A, and the rotor is balanced with a half key, which helps when couplings remain on the shaft during trim balancing. Compliance with DIN EN 60034-14 covers the stated vibration and mechanical runout limits, and the keyed shaft is supplied without a shaft-sealing ring.