Product Description:

The MAF130B-0100-FQ-M2-AH0-05-N1 asynchronous motor is manufactured by Bosch Rexroth Indramat as part of the MAF IndraDyn Asynchronous Motors series. This housing motor is built for continuous torque delivery in automation lines where conventional fan cooling is not feasible. Together with IndraDrive inverters, the unit converts electrical energy into controlled motion for conveyors, extruders, or forming machines.

The motor reaches a rated speed of 1000 rpm, a low-speed profile chosen to generate high torque at the shaft. Heat is removed by liquid cooling, and the housing provides a threaded inlet so coolant flow can carry away copper and iron losses without adding airflow inside the cabinet. Position feedback uses an EnDat2.1 digital interface; the integrated transducer provides 2048 increments per revolution and is powered by 7–12 V from the drive controller. An enclosure rating of IP65 helps protect the stator and connectors from dust and water jets, allowing installation close to the production process. Power conductors are routed on the A-side through a round industrial connector, and the flange-mounted 130-frame stator attaches directly to a gearbox or machine bed. Standard bearings support the radial and axial loads expected during continuous duty.

Liquid circuits connect through a 1/4 inch thread beside the encoder plug, which matches common coolant manifolds on molding and printing equipment. The motor complies with DIN EN 60034-14 and meets vibration level A, so the machine frame does not require additional damping. Operation is permitted at ambient temperatures from 0 to 40 °C. The plain shaft leaves space for application-specific couplings, and the motor is supplied without a holding brake or shaft sealing ring when external clamping or labyrinth seals are preferred. Class F insulation, winding code 0100, and frame length B set the thermal and electrical baseline for drive sizing, while the lack of a brake reduces inertia during stop-to-start cycles.