Product Description:

The MAF100D-0250-FQ-S2-LP0-35-N1 asynchronous motor is produced by Bosch Rexroth Indramat and belongs to the MAF IndraDyn Asynchronous Motors series. Classified as an asynchronous housing motor, it is used in automated machine tools, packaging lines, and conveyor modules where steady torque output and controlled thermal behavior are required during continuous operation. The unit has frame size 100 with length code D, is supplied without a holding brake, and routes its three-phase power through a connector on the left side of the housing, which helps simplify cable routing in compact machine layouts. The connector position also keeps the power entry point accessible when the motor is mounted beside guarding, frames, or adjacent equipment.

Heat is removed through liquid cooling, circulated in a jacket that is fed through a process port with a 1/4 inch connection thread for common plant manifolds. Rotor position is monitored by a single-turn absolute encoder that communicates over EnDat2.1 and delivers 2048 increments while operating from a 7–12 V supply line. The motor uses flange and foot mounting surfaces in accordance with DIN EN 60034-14, carries winding code 0250, and is sealed to IP65 so internal components remain protected while the shaft reaches a rated speed of 2500 rpm.

Standard rolling bearings support the rotor, and a shaft sealing ring helps keep coolant away from the grease pack while the keyed shaft transfers torque to the driven load. The shaft sealing ring also helps keep lubricant within the bearing area during operation. Dynamic balance is maintained by a rotor that is balanced with a complete key, which helps reduce vibration during steady operation and supports smoother coupling behavior. Copper conductors use Class F insulation, and the motor is intended for ambient temperatures of 0–40 °C.