Product Description:

The MAF100D-0250-FQ-S2-AH0-35-H3 is an asynchronous housing motor from the MAF IndraDyn Asynchronous Motors series. It is used with a suitable inverter to deliver controlled torque for conveyor lines, presses, and indexing axes in automated machinery. Its integrated feedback arrangement supports accurate motion control, and the compact housing allows the motor to be installed directly into machine structures where space is limited. This layout is useful in material-handling and forming equipment that needs stable speed control and repeatable positioning during continuous operation.

The motor uses liquid cooling, and the coolant connection has a 1/4 inch port that suits common machine plumbing. High-speed bearings support the rotating assembly, and the electrical design is matched to a rated speed of 2500 rpm for predictable operation across the normal load range. Position data is provided by a single-turn absolute encoder that communicates through EnDat2.1 with a resolution of 2048 increments. The encoder operates from a 7 to 12 V supply, while winding code 0250 and insulation class F support the motor’s thermal capability. The power connector is located on the A-side, which helps keep cable routing direct when the motor is mounted inside compact equipment.

The housing supports flange and foot mounting, giving the motor flexibility for face mounting or base installation. It has a plain shaft without a shaft sealing ring, so the surrounding machine should provide external protection where contamination control is required. The enclosure is rated IP65, and the motor is suitable for ambient temperatures from 0 to 40 °C. It also meets vibration test category B under DIN EN 60034-14, which supports operation on typical factory machinery. The unit is supplied without a holding brake, so stopping or load-holding force must come from the drive or from an external clamp.