Product Description:

The MAF100D-0250-FQ-M2-EH0-05-A1 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. As a drive element in automated machinery, it converts electrical power into controlled rotary motion for spindles, presses, and conveyor sections. Its asynchronous design suits applications that require continuous operation and stable thermal behavior under changing load.

An internal coolant jacket provides liquid cooling, and the circuit attaches through a 1/4 inch connection thread. This arrangement removes losses directly at the stator and helps keep the A-side fixed bearing within its tolerance range during extended operation. Power to the multi-turn absolute encoder is supplied at 7–12 V; the device communicates over EnDat2.1 and delivers positional feedback at 2048 increments, which supports high-resolution speed control and repeatable position reporting. The motor mounts by flange, and a turnable terminal box on the A-side helps route power leads in confined machine layouts. It has motor frame size 100, frame length code D, winding code 0250, vibration level A, no holding brake, and no shaft sealing ring. Insulation materials meet class F thermal limits for operation in ambient temperatures from 0 °C to 40 °C.

The drive delivers its nominal output at 2500 rpm, and compliance with IP65 keeps dust and water jets out of live parts during operation. A plain shaft simplifies coupling to sprockets or precision clamping hubs, while axial loads are managed by the fixed bearing on the drive end. Compliance with DIN EN 60034-14 supports vibration and balancing quality that match machinery built to the same standard. Flange mounting holds the housing squarely against a chilled plate or machine wall so the cooling system can transfer heat efficiently.