Product Description:

The MAF100D-0250-FQ-C0-AG1-05-N1 is a liquid-cooled asynchronous housing motor manufactured by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. This frame-size 100 model with length code D uses flange mounting and a plain shaft for direct coupling to driven equipment, which helps it fit machine layouts that need a compact motor body and a simple mechanical interface. Used on packaging, material-handling, and forming lines, it converts power from an IndraDrive inverter into regulated mechanical motion while internal coolant channels help keep operating temperature stable during continuous or cyclic duty.

Rated at 2500 rpm, the motor supports common inverter operating ranges used in mid-torque production cells and similar automated equipment. Heat is removed by liquid cooling, which circulates through a threaded housing connection to keep the F-class windings within their intended temperature range during sustained operation. Position feedback comes from an incremental encoder with 2048 increments per revolution and a 5 V supply, allowing the drive to maintain precise speed regulation and responsive closed-loop behavior. When power is removed, an electrically released brake provides 24 Nm of holding torque to help prevent shaft movement.

The enclosure has an IP65 protection rating, and a shaft sealing ring helps maintain that protection at the output end. Cooling ports use a 1/4 inch thread size, which supports straightforward connection to the machine coolant circuit. Rotor balance complies with DIN EN 60034-14, so residual vibration remains within vibration class A during operation. Continuous service is permitted in ambient temperatures from 0–40 °C without derating. The motor also uses standard rolling bearings, winding code 0250, and a connector on the A-side for the power lead.