Product Description:

The MAF100D-0200-FR-S2-AH0-05-N1 liquid-cooled asynchronous housing motor belongs to the MAF IndraDyn Asynchronous Motors series from Bosch Rexroth Indramat. It is intended for continuous rotation duties in automated production cells where precise torque and limited installation space are critical. Coupled to a variable-frequency inverter, the unit supplies regulated mechanical power for conveyors, extrusion screws, and similar motion axes that require accurate speed control across demanding duty cycles. Its enclosed motor housing supports use in compact machine layouts where steady output is needed over long operating periods.

The motor reaches a rated speed of 2000 rpm, providing a clear operating point for gearbox selection and thermal planning. Heat generated in the stator is removed through a jacket that uses liquid cooling, and the cooling circuit terminates at an enclosed rapid-action coupling for quick connection. A single-turn absolute encoder with the EnDat2.1 interface delivers 2048 increments, enabling high-resolution feedback for vector control. The housing is sealed to IP65, so dust and water jets do not affect internal components, and the winding insulation is rated Class F to tolerate elevated copper temperatures during sustained load.

The motor uses flange mounting in frame size 100 with length code D, and the rotor runs on standard bearings. A plain shaft is provided without a shaft sealing ring, so any external sealing must be handled by the connected machine. Encoder electronics draw 7–12 V from the drive controller, while power conductors exit on the A-side through a locked connector and coolant attaches through a rapid-action fitting sized at 1/4 inch. Vibration performance is graded level A under DIN EN 60034-14, operation is permitted from 0 °C to 40 °C, and the unit is supplied without a holding brake for applications that secure the load through drive torque or external locking mechanisms.