Product Description:

The MAF100D-0200-FQ-S2-FP0-05-N1 is a liquid-cooled asynchronous housing motor manufactured by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. It uses motor frame size 100 with length code D, providing a compact footprint for medium-torque machine axes in automated production lines. Flange mounting simplifies alignment to gearboxes or direct-drive stations, and the shaft is balanced with a complete key so residual vibration remains low when acceleration ramps are steep. A standard bearing set carries combined radial and axial forces, making the unit suitable for conveyors, rotary tables, and forming spindles that run for long periods under cyclic load.

The cooling circuit relies on liquid cooling through a threaded connection. The port is dimensioned at 1/4 inch, allowing quick hookup to common industrial coolant manifolds. Winding code 0200 identifies the electrical characteristics that the drive inverter must match. Position feedback is transmitted over the EnDat2.1 serial interface by a single-turn absolute encoder with 2048 increments, and the sensing electronics operate from a stabilized supply of 7-12 V. Because the motor is supplied without a holding brake, vertical loads must be secured by mechanical locking or drive torque during power-off.

The housing carries an IP65 protection rating, blocking dust ingress and water jets encountered in washdown zones. At a rated speed of 2000 rpm, the rotor can deliver continuous torque while staying within the Class F winding temperature limit. Operation is permitted between 0 °C and 40 °C ambient. The shaft is fitted with a shaft sealing ring, which helps prevent coolant or oil migration along the keyed output. The mechanical design follows DIN EN 60034-14 for vibration limits, and the keyed shaft simplifies coupling to pulleys or gear wheels without additional machining.