Product Description:

The MAF100D-0200-FQ-S2-BP0-05-N1 asynchronous motor is produced by Bosch Rexroth Indramat as part of the MAF IndraDyn Asynchronous Motors series. This liquid-cooled housing motor is intended for industrial automation where constant torque must be delivered from a compact frame by removing heat through a coolant circuit. Integrated into drive systems, it supplies controlled mechanical power for conveyors, forming stations, and other continuous-duty axes that benefit from high thermal density and sealed construction. Its asynchronous design also supports steady operation in machines that run for long periods under changing load conditions.

At its rated speed of 2000 rpm, the motor delivers steady output while heat is removed by liquid cooling. The housing contains a cooling circuit with a 1/4 inch connection thread, so standard piping can attach directly. Rotor position is monitored by a single-turn absolute encoder using EnDat2.1 with 2048 increments, and its electronics draw 7 to 12 V from the drive. Mechanical power leaves the motor through a keyed shaft balanced with a complete key and protected by a shaft sealing ring, which helps the enclosure maintain an IP65 rating. A B-side power connector simplifies wiring, the bearings are the standard type for the frame-100 length-D format, and winding code 0200 is used for the electrical package. Because the unit is supplied without a holding brake, load retention must be handled externally.

The insulation system is classified as F, which allows elevated winding temperatures when the ambient air remains within 0 to 40 °C. The motor uses flange mounting for accurate alignment to machine plates. Vibration grade A helps limit dynamic loads on adjacent structures, and the keyed shaft supports positive torque transfer without slip. The assembly also complies with DIN EN 60034-14.