Product Description:

The MAF100D-0200-FQ-S2-BH0-35-N1 is an asynchronous housing motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. Designed for installation inside machine frames, the unit converts electrical energy into rotary motion for pumps, extruders, and positioning axes in automated cells where continuous torque and sealed construction are required. As part of a closed-loop drive package, the motor pairs with Rexroth inverters to deliver controlled acceleration, precise speed holding, and reduced maintenance compared with air-cooled designs.

Thermal management is handled through liquid cooling; coolant enters and exits through a connection thread that measures 1/4 inch, allowing quick tie-in to standard hose fittings. The housing carries an IP65 protection class, so dust ingress is prevented and low-pressure water jets will not affect internal windings. An insulation system rated to class F permits winding temperatures up to 155 °C, while the dynamic balance meets vibration grade A in accordance with DIN EN 60034-14. The motor uses a combined flange-and-foot mounting pattern, and the power connector is oriented on the B-side for cable routing inside cabinets kept below the permissible ambient range of 0 to 40 °C.

The motor has a rated speed of 2000 rpm, matching common screw and conveyor gear ratios while keeping slip losses moderate. Position feedback is delivered by a single-turn absolute encoder with a resolution of 2048 increments, and it sends data through the EnDat2.1 serial interface for immediate position availability after power-up. The encoder draws 7–12 V, allowing it to share low-voltage bus supplies already present in modular drive panels. The motor has no holding brake or shaft sealing ring, which reduces rotating inertia, and the plain shaft suits direct coupling to keyed hubs or shrink disks.