Product Description:

The MAF100D-0200-FQ-S2-BG0-05-N1 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. With a frame size of 100 and length code D, the unit is intended for flange mounting inside machines that demand moderate inertia and continuous torque from a compact build. By coupling an external coolant circuit to the motor body, it supports tightly controlled temperatures, allowing dependable motion of conveyor sections, forming rolls, or similar automation axes where direct drive integration is preferred.

Thermal management is handled by liquid cooling that enters and exits through a connection thread sized 1/4 inch, so installation only requires matching pipe fittings. Internally, a standard bearing arrangement carries the rotor, and a plain shaft with a shaft sealing ring helps prevent fluid ingress at the output end. The power leads terminate on the B-side through a molded connector, while the absence of a holding brake means any static holding force must be supplied by the drive. Position feedback relies on an EnDat2.1 interface; the single-turn absolute encoder resolves 2048 increments and operates from a supply of 7–12 V, giving the controller precise rotor angle data without needing batteries. The winding code 0200 matches the stator to drive parameters used for this frame size.

The housing is sealed to IP65, permitting washdown cleaning while maintaining internal clearances, and the vibration level meets category A under DIN EN 60034-14, so the motor can be coupled to precision gear stages without extra damping. Its rated mechanical speed is 2000 rpm, matching the slip characteristics of the 0200 winding. Safe operation is specified for ambient temperatures between 0 to 40 °C, and class F insulation tolerates the winding temperature rise that accompanies liquid-cooled duty.