Product Description:

The MAF100D-0200-FQ-S2-AK0-05-N1 is a liquid-cooled asynchronous housing motor manufactured by Bosch Rexroth Indramat and supplied within the MAF IndraDyn Asynchronous Motors series. The unit combines a 100-frame stator with D length and is designed for flange mounting on machinery frames. In automated cells, it converts electrical power from an inverter into controlled rotary motion for spindles, extruders, or conveyor duties where compact size and high thermal load capacity are required. Its housing design also suits enclosed machine layouts where steady heat removal is important during continuous operation.

The stator jacket is traversed by a liquid cooling circuit that stabilizes winding temperature and allows the motor to maintain nameplate output under constant load. Coolant enters through a connection thread measuring 1/4 inch, so standard industrial fittings can be attached directly without special adapters. Rotor position is monitored by a single-turn absolute encoder that communicates over EnDat2.1, allowing digital feedback and parameter exchange through the same interface. The measuring element provides 2048 increments per revolution, which supports stable low-speed regulation and accurate speed monitoring in closed-loop drive systems. The encoder electronics operate from 7-12 V, which matches the supply range used by many compatible drive controllers.

The housing has a protection level of IP65, which blocks dust ingress and resists water jets in industrial areas. Dynamic performance is supported by a rated speed of 2000 rpm, and the shaft is balanced with a half key to vibration grade A to reduce transmitted vibration at the coupling. Operation is permitted in ambient temperatures from 0 to 40 °C, and insulation class F provides thermal margin for sustained duty. Conformance with DIN EN 60034-14 indicates that vibration behavior and mounting-related tolerances follow a recognized motor standard.