Product Description:

The MAF100D-0200-FQ-S2-AH1-05-N1 is an asynchronous housing motor produced by Bosch Rexroth Indramat as part of the MAF IndraDyn Asynchronous Motors series. This liquid-cooled unit is supplied in frame size 100 with length designation D and serves automated machinery that needs a constant torque source with reduced thermal load. By integrating with IndraDrive controllers, it turns three-phase power into precise rotary motion for conveyors, tool spindles, or indexing tables while maintaining commanded speed across duty cycles common in industrial production lines.

Thermal energy is removed through liquid cooling channels that terminate in a connection thread accepting a 1/4 inch coupling, allowing the motor to join closed coolant loops without external manifolds. The housing is prepared for flange mounting, uses standard bearings, and has a plain shaft without a sealing ring while meeting vibration level A in DIN EN 60034-14. The stator windings marked 0200 are energized through an A-side power connector, and insulation built to Class F withstands elevated winding temperatures at the rated speed of 2000 rpm. Feedback is transmitted over the EnDat2.1 digital interface, so the drive receives absolute rotor position through a single cable and can support stable closed-loop control during speed-regulated operation.

The single-turn absolute encoder supplies 2048 increments per revolution and operates from 7 to 12 V, enabling fine velocity loops while keeping cable count low. An electrically released brake delivers 24 Nm of holding torque for static positioning during power loss, which helps the motor remain secure when motion is stopped. Environmental protection reaches IP65, and the motor continues to perform in ambient temperatures from 0 to 40 °C without derating. The threaded cooling port keeps liquid isolated from the stator compartment, which supports reliable operation in enclosed machine layouts where coolant routing must remain controlled.