Product Description:

The MAF100D-0200-FQ-S2-AH0-05-N1 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. In automated production lines, this motor supplies continuous rotational power to conveyor sections, gantry axes, and similar equipment when paired with an inverter drive. It is intended for applications that need steady rotary output over extended operating periods. The motor works as part of a controlled drive system so speed and torque can be adjusted to match machine demand.

Thermal management relies on liquid cooling, and the integrated cooling jacket uses a 1/4 inch connection thread so heat can be removed without external airflow. This cooling method helps maintain thermal control in installations where external airflow is limited or undesirable. Position feedback is delivered through a single-turn absolute EnDat2.1 encoder that provides 2048 increments per revolution and operates on a 7–12 V supply for precise rotor data. The housing carries IP65 protection, which helps keep dust and water jets away from the internal windings. The motor uses class F insulation, and a standard bearing arrangement supports the plain shaft. It is supplied without a holding brake, so any load-holding function must be provided externally when power is removed.

At a commanded speed of 2000 rpm, the 0200 winding delivers rated mechanical output while staying within specified vibration limits. The motor has a frame size 100 housing with length code D, which aligns with common gearbox and machine frames. It uses flange mounting to direct radial load into the machine plate, and the power cable exits on the A-side through a molded connector. Operation is allowed from 0 to 40 °C, and compliance with DIN EN 60034-14 confirms vibration level A performance. Because the shaft does not have a sealing ring, an external barrier may be needed where fluid from the driven mechanism could reach the shaft area.