Product Description:

The MAF100D-0200-FQ-M0-AQ1-35-N1 is an asynchronous housing motor produced by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. This frame-mounted unit converts three-phase electrical power into continuous rotary motion for pumps, extruders, and positioning axes in automated machinery. Integrated passages in the stator jacket support high thermal loads while helping keep the exterior temperature low. That arrangement is useful in tightly packed equipment where long operating cycles and compact installation space are both important.

At a rated speed of 2000 rpm, the motor delivers constant mechanical output while staying within its thermal envelope provided by liquid cooling. Coolant enters through a connection thread sized for a 1/4 inch fitting, which supports connection to common machine manifolds. The housing is rated IP65, so dust and low-pressure water jets are kept away from energized parts. The windings use Class F insulation, allowing winding temperatures up to 155 °C before insulation damage begins. Power enters through an A-side connector, and the motor has flange and foot mounting for either face attachment or base mounting. The output shaft is balanced with a complete key, and the lack of a shaft sealing ring reduces drag at the shaft end.

An electrically released brake provides 24 Nm of static torque, and it is matched to the motor's size 100 frame. This brake is intended to hold the load at standstill during shutdown rather than to handle dynamic braking while the shaft is moving. With a vibration severity of Level A, the rotor is suited for applications that need steady running behavior at the coupling. Operation is permitted in ambient temperatures from 0 to 40 °C, and no separate airflow is required around the housing. Compliance with DIN EN 60034-14 sets the balancing method, test procedure, and vibration limits used for this motor.