Product Description:

The MAF100D-0200-FQ-M0-AQ0-35-N1 is an asynchronous housing motor built by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. With frame size 100 and D length code, it fits drive trains that need medium power density without taking excessive space. The standard bearing arrangement supports radial and axial loads, and the keyed shaft transfers torque directly to couplings or gearboxes in material-handling and metalworking equipment. This layout suits machines that need a compact motor body with stable mechanical support during continuous motion.

Thermal management is achieved through liquid cooling, and coolant enters through a connection thread sized 1/4 inch in the motor housing. Heat is carried away through a closed coolant circuit instead of external airflow. The flange and foot mounting arrangement supports accurate alignment on machine structures, while a connector-based power feed simplifies wiring. A rated speed of 2000 rpm supports direct coupling to moderate-speed shafts, and the enclosure has an IP65 protection rating to resist dust ingress and water jets. Continuous operation is permitted at ambient temperatures from 0 to 40 °C. The shaft uses a keyway and does not include a shaft sealing ring, which keeps the output side simple for clean installations.

The motor is supplied without a holding brake, so static load holding must come from the drive or an external locking device. Insulation class F allows the winding to handle elevated internal temperatures during demanding duty cycles. Power exits on the A-side of the housing, which gives a fixed cable direction at the motor. Rotor balance follows the complete-key convention to keep vibration controlled during rotation, and winding code 0200 sets the electrical characteristics used for this model. Compliance with DIN EN 60034-14 states the permitted vibration severity.