Product Description:

The MAF100D-0200-FQ-C0-AH0-35-N1 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. Designed for conveyor drives, test stands, and processing lines, the unit delivers rotary motion to plant equipment while keeping stator temperatures low through a built-in coolant circuit. Its asynchronous design works with vector-controlled inverters used in modern automation systems and tolerates changing load conditions without sacrificing stable operation. This arrangement is useful where surrounding equipment leaves little room for external airflow around the motor housing.

Heat is removed by liquid cooling that circulates through machined ports, and the mating fittings seat on a 1/4 inch thread size for straightforward hose connection. The housing carries an IP65 rating, which keeps out dust and allows cleaning with low-pressure water jets. Under nominal conditions, the rotor operates at 2000 rpm, matching the 0200 winding code. A shaft-mounted incremental encoder provides feedback at 2048 increments and draws logic power from a regulated 5 V supply. Power leads exit on the A-side through a sealed connector, while the plain shaft is supplied without a sealing ring or an integral holding brake.

Ambient operation is permitted from 0 to 40 °C, allowing use in most indoor installations without auxiliary heating. Compliance with DIN EN 60034-14 supports the balanced running accuracy expected for a frame size 100 motor with length code D in short-cycle machinery. The motor uses flange and foot mounting, so it can be attached either by its face or by its base, and the A-side connector orientation helps keep cable routing consistent in either layout. Standard bearings, vibration level A, and insulation class F support steady mechanical behavior and thermal reserve during continuous duty.