Product Description:

The MAF100D-0200-FQ-C0-AH0-05-N1 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. The unit converts three-phase electrical power into controlled rotary motion for pumps, extruders, or machining spindles that must remain thermally stable during prolonged cycles. It is intended to be coupled to an IndraDrive inverter to form a closed-loop axis in automated production cells, and its frame size and cooling layout suit tight enclosures where external airflow is limited. This arrangement supports applications that need steady motor performance during long operating periods.

The motor reaches a nominal speed of 2000 rpm, which lets controllers synchronize conveyor or spindle cycles without requiring higher motor speed. Thermal energy is removed through liquid cooling, and coolant enters through a connection thread of 1/4 inch. Feedback comes from an incremental encoder that delivers 2048 increments per revolution and operates on 5 V, supplying suitable resolution for velocity and position loops. The rotor uses a standard bearing set, while the stator windings use code 0200 for use with matched inverters. Mechanical installation relies on flange mounting, power arrives on the A-side through a keyed connector, and the plain shaft is supplied without a shaft sealing ring. The motor is also supplied without a holding brake when stopping is handled externally.

The enclosure is rated IP65, which blocks dust ingress and low-pressure water jets. The windings use F-class insulation to tolerate elevated internal temperatures, and the permitted ambient range is 0–40 °C. Vibration performance is classified at level A according to DIN EN 60034-14. The motor has frame size 100 and length code D, which set the housing geometry for this model. Because the shaft has no sealing ring, sealing at the machine interface must be provided by the connected equipment when contamination control is required.