Product Description:

The MAF100D-0200-FQ-C0-AG0-05-A1 is an asynchronous housing motor manufactured by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. It converts electrical energy into regulated mechanical rotation for conveyor stations, presses, and assembly axes. This operating role supports dependable speed control in industrial automation cells where steady motor response is needed during repeated starts and speed changes.

Designed for flange mounting, this motor fits the 100 frame with length code D and complies with DIN EN 60034-14 vibration level A. The motor is sealed to IP65, which helps keep dust and water jets away from internal parts, and a shaft sealing ring helps block fluid entry at the output end. The stator winding marked by code 0200 reaches a nominal speed of 2000 rpm and uses class F insulation for a winding temperature of 155 °C. Position feedback comes from an incremental encoder with 2048 increments and a supply voltage of 5 V, allowing the drive to monitor motion with fine resolution during closed-loop speed control. The A-side power connector supports straightforward cable routing, and the motor can operate in ambient temperatures from 0–40 °C without derating.

Heat is removed through a liquid cooling circuit, so the motor uses a liquid-cooled housing that can transfer heat away from the stator more effectively than self-cooling designs. The housing has a connection thread, and the coolant inlet uses a 1/4 inch pipe size for direct connection to the machine manifold. An A-side fixed bearing supports the rotor and helps keep axial play stable during frequent reversals. The drive end uses a plain shaft for connection to clamping hubs or user-supplied keyed elements. The motor is delivered without a holding brake, which reduces rotating mass and leaves holding force to external means when required.