Product Description:

The MAF100D-0150-FQ-S2-AQ0-35-N1 is a liquid-cooled asynchronous housing motor from Bosch Rexroth Indramat’s MAF IndraDyn Asynchronous Motors series. It serves as the primary drive element in automated lines that require continuous torque while diverting heat through an internal cooling jacket, keeping the stator within its allowable temperature rise. Integrated feedback electronics and a sealed enclosure make the unit suitable for positioning or speed-regulated axes that operate in environments containing airborne oil, dust, or process fluids. As an asynchronous motor, it is well suited to demanding production equipment that requires stable operation with a compatible inverter.

At a rated speed of 1500 rpm, the motor converts electrical energy into a stable mechanical output that matches the needs of many conveyor and spindle tasks. Thermal management relies on liquid cooling routed through a 1/4 inch connection thread so external chillers can remove heat without adding cabinet fans. Installation options include flange and foot mounting, and the housing carries an IP65 protection rating that resists dust and water jets. Rotor position data is transmitted through an EnDat2.1 interface, enabling precise closed-loop control when connected to IndraDrive inverters. This arrangement supports machine layouts that need accurate speed regulation and consistent thermal performance during long duty cycles.

The single-turn absolute encoder provides 2048 increments per revolution on a 7–12 V supply. The windings use F-class insulation to tolerate elevated temperatures, and reliable operation is maintained between 0–40 °C ambient. The motor has frame size 100, length code D, and winding code 0150. A balanced shaft with a complete key supports positive torque transmission, while the A-side power connector can simplify cable routing in compact installations. Standard bearings are used, and the motor is supplied without a holding brake or a shaft sealing ring.