Product Description:

The MAF100D-0150-FQ-S0-BG0-05-H2 is a liquid-cooled asynchronous housing motor built by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. This motor is intended for continuous-duty motion tasks in automation cells, where electrical energy is converted to rotational power for precision conveyors, tool drives, or process pumps. Its asynchronous design is suited to applications that need steady output over long operating periods, and the motor uses class F insulation to tolerate elevated copper temperatures during regular operation.

It removes heat through liquid cooling that circulates through an internal jacket, and the cooling medium is connected to the machine loop by a 1/4 inch thread. This arrangement supports stable winding temperatures even at the rated speed of 1500 rpm. The housing carries a protection level of IP65, so dust ingress is sealed and low-pressure water jets do not affect operation. High-speed precision angular-contact bearings are fitted and are identified here as high-speed bearings, which helps minimize runout and supports elevated rotor frequencies. The motor uses frame size 100 with length code D, and winding code 0150 indicates the electrical resistance and inductance used by the matched IndraDrive inverter.

Mechanical installation relies on flange mounting, and torque is transmitted through a plain shaft with a sealing ring. The unit is supplied without a holding brake, so external clamping devices or drive torque must secure the axis at standstill. Safe operation is maintained at ambient temperatures from 0–40 °C. Power conductors reach the stator by a connector fixed on the B-side, which helps keep cable routing short in compact layouts. The shaft sealing ring adds protection against contaminants, and the lack of an external fan helps avoid fan noise while keeping enclosure air free from motor cooling airflow.