Product Description:

The MAF100D-0150-FQ-M2-AH0-05-A1 is an asynchronous housing motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. It is intended for continuous duty in automated machinery where compact torque sources must be mounted directly to the machine frame. The motor works with compatible drive controllers to provide regulated rotary motion for conveyor sections, test benches, and manufacturing cells that need dependable induction motor performance over long operating cycles. Because the housing mounts directly to the machine structure, the design suits installations where space around the drive train is limited and stable speed control is required. Its asynchronous design supports robust operation and integrates with standard drive hardware used for regulated speed control.

Its stator windings use insulation class F and correspond to winding code 0150. The motor uses liquid cooling, and coolant reaches the housing through a connection thread sized 1/4 inch so external hoses can be attached without adapters. Mechanical attachment uses flange mounting that matches frame size 100 and length code D, while a plain shaft transmits power to the load and follows DIN EN 60034-14 balance quality class A. The motor reaches a rated speed of 1500 rpm, and it can tolerate vibration level A during operation. Power enters on the A-side through a sealed connector, and the enclosure carries a protection rating of IP65. The motor is supplied without a holding brake or a shaft sealing ring.

Positional feedback is supplied by a multi-turn absolute encoder with a supply range of 7 to 12 V. The encoder uses a measuring disk with 2048 increments and communicates over the EnDat2.1 digital interface, allowing the drive to track shaft position through repeated power cycles. This feedback arrangement lets the controller monitor shaft rotation without a separate external feedback device. A rigid a fixed bearing on the A-side supports radial and axial loads during operation. The permissible ambient range is 0 to 40 °C, which limits installation to standard factory floors without additional cooling air.