Product Description:

The MAF100D-0100-FR-S2-AH0-05-N1 is a liquid-cooled asynchronous housing motor produced by Bosch Rexroth Indramat within the MAF IndraDyn Asynchronous Motors series. Designed for tightly controlled industrial axes, the unit converts electrical power into mechanical rotation for conveyors, presses, and automated tooling. Its housing supports liquid circulation so thermal loads stay low while torque is delivered at rated speed, and the motor’s flange orientation simplifies alignment with gearboxes and couplings during installation. This arrangement is useful in enclosed machinery where stable temperature control is needed without depending on high cabinet airflow.

The motor reaches a rated speed of 1000 rpm, indicating its maximum continuous shaft velocity in normal operation. Heat is extracted through liquid cooling; fluid enters the enclosed 1/4-inch rapid-action coupling, passes through internal channels, and exits to an external chiller, which helps keep winding temperature within the insulation limit. Position feedback is supplied by a single-turn absolute encoder that outputs through the EnDat2.1 interface and resolves motion into 2048 increments, allowing fine velocity loops without extra interpolation. The stator insulation complies with class F, and the housing is sealed to IP65, so dust ingress and water jets do not interrupt service. The model is delivered without a holding brake, so stopping and load retention must be handled by the drive or by external mechanical components.

The permitted ambient air range is 0 to 40 °C, so the surrounding machine space should remain within that span during operation. The plain shaft and the absence of a shaft sealing ring reduce friction, but they also require a clean coupling chamber to limit contamination near the bearing area. Because the shaft is plain, torque is typically transferred through a clamping or friction-fit coupling rather than a keyed hub. Power and feedback connectors sit on the A-side for compact routing, and the motor uses flange mounting; this configuration, combined with vibration grade A, keeps displacement within DIN EN 60034-14 limits during continuous duty. The A-side cable exit can also help keep wiring clear of nearby guards, supports, or rotating machine elements.