Product Description:

The MAF100D-0100-FQ-S2-BP0-05-N1 is an asynchronous housing motor produced by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. This liquid-cooled assembly provides the rotating element in servo-drive packages that power material-handling lines, packaging machinery, and other automated equipment that requires stable torque and precise speed control. By combining the rotor, stator, and sealed cooling jacket in one enclosure, the motor delivers mechanical power to the driven shaft while helping the housing maintain a controlled operating temperature.

Heat is removed through liquid cooling, with coolant circulating directly through the housing to support continuous-duty operation. The enclosure has an IP65 protection class, which helps keep out dust and resists water jets when the motor is installed outside a sealed cabinet. At a rated speed of 1000 rpm, the motor suits slower high-torque applications, and its single-turn absolute encoder provides 2048 increments per revolution for position feedback. Operation is intended for ambient air from 0 to 40 °C, and the motor uses a 100-frame D-length lamination stack with flange mounting and vibration level A for stable installation.

The feedback interface is EnDat 2.1, providing bidirectional digital communication so the drive can read absolute position data without additional feedback wiring. Coolant enters through a 1/4-inch threaded connection, and the power conductors exit on the B-side through a locked connector matched to winding code 0100. The shaft is balanced with a complete key, and a shaft sealing ring helps keep fluid and debris away from the flange-mounted gearbox. Compliance with DIN EN 60034-14 supports low vibration during operation, and the motor is supplied without a holding brake while using insulation class F and a keyway shaft.