Product Description:

The MAF100D-0100-FQ-S2-BG0-05-N1 is manufactured by Bosch Rexroth Indramat and belongs to the MAF IndraDyn Asynchronous Motors series. This liquid-cooled asynchronous housing motor is built for flange mounting in automated lines where precise speed regulation and continuous torque are required. By circulating coolant through internal channels, the motor maintains stable thermal conditions and supports reliable operation in pumps, extruders, and material-handling axes used in industrial automation cells.

The stator jacket accepts coolant through a 1/4 inch connection thread, and the closed-loop liquid cooling system allows full-load operation with low audible noise. Motion feedback is provided by a single-turn absolute encoder that communicates over the EnDat2.1 interface, and its resolution of 2048 increments supports accurate speed control. With a rated speed of 1000 rpm, the motor suits slow, high-torque processes. Housing seals meet the IP65 protection class, preventing dust ingress and low-pressure water jets from reaching internal components. Additional details include a connector-based power lead on side B, standard bearings, and compliance with DIN EN 60034-14 vibration limits.

A plain shaft with a shaft-sealing ring transmits torque while helping keep lubricant inside the gearbox. The windings use class F insulation so the copper can tolerate elevated temperatures generated by frequent starts. The permitted ambient temperature range of 0–40 °C matches typical industrial operating conditions, and vibration level A helps protect nearby metrology equipment. The motor has frame size 100 with length code D and winding code 0100, and it uses a flange mounting arrangement. Because the motor is supplied without a holding brake, any static load must be retained by external mechanical locking or by drive torque. The encoder draws 7 to 12 V, and the connection thread format simplifies integration into existing coolant manifolds.