Product Description:

The MAF100D-0100-FQ-S0-BH0-05-N1 belongs to the MAF IndraDyn Asynchronous Motors series manufactured by Bosch Rexroth Indramat. It is a liquid-cooled asynchronous housing motor intended for industrial automation tasks that demand continuous torque delivery while keeping frame temperatures low. By combining the asynchronous rotor design with housing-integrated coolant passages, the motor supplies process equipment, test rigs, and forming machines with smooth speed control under harsh ambient conditions.

The motor reaches a rated speed of 1000 rpm, a value selected for systems that need high torque at relatively low shaft velocity. An enclosure rating of IP65 protects the stator and windings against dust and directed water jets, permitting installation near coolant lines or lubricated mechanisms. Heat is removed through liquid cooling, and coolant enters and exits through a connection thread sized at 1/4 inch, simplifying hose selection in closed-loop thermal circuits. The winding insulation carries a Class F rating, which allows conductor temperatures up to 155 °C. A standard bearing set supports the rotor, while winding code 0100 identifies the electrical layout for matching IndraDrive inverters. The motor’s power is routed through a sealed connector to help prevent moisture ingress during washdowns.

The motor uses flange mounting, allowing frame size 100 with length code D to bolt directly to gearboxes or machine walls. Torque is transmitted by a plain shaft, and no shaft sealing ring is fitted, so external protection is required when fluids are present. The power connector sits on the B-side of the housing to clear service corridors. Operation is specified between 0–40 °C, aligning with typical factory environments. Vibration level A and conformity with DIN EN 60034-14 set limits on allowable machine movement and balancing quality.